These geyser nozzles feature a full AISI 304 stainless steel construction, which ensures long lifespan, reliability and the brightness of the nose cone. This nozzle model, unlike the previous WUCE, must be installed below the water level so that is requires an air supply pipe in order to perform such effect.
This nozzle performs a “wave” effect in wide and deep ponds where the falling water is blended with air (60%) so that the pond requires an automatic level control in order to limit the “spray” effect and not to lift the water level.
Code | Joint | Head m colon. mH20 | Flowrate l/min | Jet height m | Dimensions mm | Weight g |
---|---|---|---|---|---|---|
WUDE-C0001 | ¾" | 5/8 | 50/100 | 0.2/0.4 | A215 B32 | 190 |
WUDE-D0001 | 1" | 5/10.2 | 80/160 | 0.3/0.5 | A230 B36 | 260 |
WUDE-E0001 | 1 ½" | 5/10.2 | 210/300 | 0.4/0.8 | A280 B52 | 480 |
WUDE-F0001 | 2" | 6/15.3 | 300/400 | 0.4/0.8 | A295 B68 | 800 |
These foaming jet performed by this nozzle is a big water column that reminds of a geyser. Its height may be that impressive boasting a lot of foam and spreading the mixture water/air around for some meters.
Browse our online catalogue and discover our fountains and watergames...