Hydraulics for fountains. Foam nozzles WUDL
These nozzles feature a full AISI 304 stainless steel construction, it ensures long lifespan and reliability. The nose cone is provided with a silicon gasket to get smooth orientability and optimum tightness.
The nozzle’s spherical head is adjustable in order to vary the air/water blend and to reduce the amount of water.
Depending on this, we can have variable and clean effects.
The water column is a bit different if compared to the WUCL one. The jet is thicker and the foam spreads at a higher level. The air rate in the mixture can be anything up to 70%. The vertical effects we have as a result are various and suggestive, so that the device can either work standalone or in bundle with others. Recurring layouts are rings of foam jets deflecting to the center or out of the ring’s center. The effect can be a big spruce tree or a thick water crown as a result. Measuring out the pump flow, the effects can be enriched with bursting foam balls or white boiling water.
| Code | Joint | Head m colon. mH20 | Flowrate l/min | Jet height m | Dimensions mm | Weight g |
|---|---|---|---|---|---|---|
| WUDL-B2001 | ½" | 6/10.2 | 30/60 | 0.5/2.0 | A145 B35 | 320 |
| WUDL-C2001 | ¾" | 8/15.3 | 60/150 | 1/3 | A115 B38 | 450 |
| WUDL-D2001 | 1" | 10.2/20.4 | 130/250 | 1.5/4 | A180 B45 | 600 |
| WUDL-E2001 | 1 ½" | 15.3/25 | 300/420 | 2/5 | A190 B55 | 750 |
The correct performance of this nozzle come down to the water level, as it requires the right air/water mixture to better perform. The nozzle features a number of holes at its bottom where the air flows in, the nose cone is adjustable in order to measure out the air amount.
